Filter
99 results
30
- 10
- 15
- 20
- 25
- 30
- 50
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
-
System Monitor 3 Gen (SysMon) Fix mounted
The SysMon 3 Gen is a platform-independent system monitoring unit which monitors- and, if necessary, controls - the internal parameters of a System Platform such as voltages, temperatures, digital inputs and fan speeds. -
25 W 11.4-36 VDC | 2 outputs | PSU PCI/104 SFF | conduction-cooled
This rugged isolated power supply is capable of supplying up to 25 W of power output across two (one 5 V and one 3.3 V) output for a range of sensitive defense applications as well as industrial applications. With conformal coating. -
Hall-Sensor Board with analog output
The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
700 W VITA62 PSU | conduction cooled | 6 U | 5 HP | DC
Designed to meet the requirements of VITA 62 for use in harsh environments. For use in DC systems, they are 6 U high by 5 HP (1-inch) wide modules with guide blocks, for use in conduction cooled VPX systems. -
3U CompactPCI Serial Power Interface Board
Standalone Power-BP 3U 8HP to connect CPCI Serial power supplies to compactPCI Serial-BPs. The connection is made via cables. -
LED Display for SysMon
LED Display accessory for System Monitor (SysMon) with 11 LEDs and push button to generate a SYSRESET# signal directly from the front of the system. -
120 W | 15 - 36 VDC | 5 outputs | PSU PCI/104 for SFF
This rugged isolated power supply is capable of supplying up to 120 watts of power output for a range of sensitive defense applications as well as industrial applications. -
VME Form Factor Extender, 6U, 60mm
The VME form factor extender 6U 60 mm allows to adapt boards for use in the same VMEbus system. It maintain the correct depth dimensions and allow the front panel to be aligned. -
Chassis Rugged Slide Rail Size 5
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments. -
Chassis Rugged Slide Rail Size 7
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments. -
Electronic Load Board 3U CPCI-S (air cooled)
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
Chassis Slide Rail Size 7.
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments. -
Hold-Up Power Module - PCB only without cover
Hold-Up Power Module for voltage input of 16 to 36VDC provides maximum power output of 330W for 50ms per MIL-STD 704 / DO160. Board can be ordered as fixed-mount or plug-in version. -
Hall Sensor Board with I2C Interface 050-280
Version: +24V/60A -24V/60A -5,2V/90A -2V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
3U VITA 62 Power Supply Module, 300W with hold up power, conduction cooled
Designed to VITA 62, this 3U x 9HP DC power supply module is conduction-cooled and provides up to 50ms hold-up time and a BIT controller -
Electronical Load Board 3U CompactPCI (air cooled)
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
Electronical Load Board 6U VME64x (air cooled)
The 6U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
28 Volt DC Shelf Manager carrier card with conformal coating
The 28VDC carrier card with confirmal coating provides all the connectors necessary for the monitoring and control functions of any Elma systems, and also the power supply filtering required by the noise and transients consistent with MIL-STD-704E. -
Hall Sensor Board with I2C Interface 050-279
Version: +5V/90A +3,3V/25A +12V/60A +12V/60A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
Hall Sensor Board with I2C Interface 048-368
Version: +5V/60A +5V/60A +3,3V/25A +12V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
OpenVPX Cable solutions
Compliant to VITA 46 and 65, the cabling assemblies are ideal for development. They can be used for I/O to bulkhead connectors and slot-to-slot connections. Front-plug versions allow testing across the backplane or full interconnect path. -
VME Test Extender 6U/220mm Universal
The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the... -
6U VPX Load Board
6U VPX Load Board 6U x 160mm, convection-cooled -
Fan Controller (24V / 48V version)
The Fan Controller (FanCon) is a platform independent system monitoring unit which monitors and if applicable controls the parameters, such as temperature and fan rotation speed, of a basic system. -
Fan Controller (12V version)
The Fan Controller (FanCon) is a platform independent system monitoring unit which monitors and if applicable controls the parameters, such as temperature and fan rotation speed, of a basic system. -
Electronical Load Board 3U CompactPCI (conduction cooled)
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
3U VPX Conduction Cooled Load Board
3U VPX Load Board, conduction cooled -
120 W | 15 - 36 VDC | 5 outputs | PSU PCI/104 SFF | conduction-cooled
This rugged isolated power supply is capable of supplying up to 120 watts of power output for a range of sensitive defense applications as well as industrial applications - with conformal coating. -
VITA 46.11 Chassis Manager Source Code, Designed in Alignment with SOSA
Elma’s SOSA aligned VITA 46.11 Chassis Manager is available as a source code license for integration into custom Chassis Manager implementations. -
SysMon / Shelf Manager Adapter Board
Adapter board for pluggable SysMon and Shelf Manager versions.