Backplanes Product Type

Backplanes

Elma Electronic offers a comprehensive range of AdvancedTCA backplanes.

Mesh, Dual Star (5U), and 7U Pluggable Dual Star. Versions for both 19" rackmount and 23" ETSI racks are available. All Elma Electronic AdvancedTCA backplanes are compliant to the PICMG 3.0 Rev. 1.0 specifications.

All Backplanes

Sidebar

ATCA 5U 2 Slot Mesh w uTCA connector for SHMM

The 5U 2-slot ATCA backplane is a switchless 2X Replicated Mesh with point-to-point links between the slots. However, a 1X Mesh can also be implemented on the 2-slot.
3U OpenVPX 2-slot Profile BKP3-DIS02-15.2.8-n

3U OpenVPX Backplane 2-slot, VITA 65, Backplane profile BKP3-DIS02-15.2.8-n, payload slot profile SLT3-PAY-1D-14.2.6, payload or peripheral slot profile SLT3-PAY-1D-14.2.6, power connection with M3/M4 power bolts
6U 9-Slot OpenVPX Backplane, Profile BKP6-CEN09-11.2.13-1

VPX central switch, up to 3.125 Gbps per channel
CompactPCI 6U 64 bit ATX 4 slot, P1-2s, P3-5l, RoHS

CompactPCI 6U 4 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
cPSB 2.16 8 Slot - 7 w/cPCI, 1 FS

CompactPCI CPSB 2.16 6U 8 slot, 7 w/cPCI, 1 Fabric, fully compliant to the PICMG 2.16 Packet Switching Backplane specification.
VME J1 21 Slot with ADC Connectors

VME J1 backplane 21 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
CompactPCI 3U 8 slot right justified, 32 bit, P1s, P2l

CompactPCI 3U 8 slot 32 bit with system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1. User defined VI/O is standard.
12-slot 3U VPX backplane aligned to SOSA 1.0. Includes 2 VITA 62 PSU slots

3U 12-slot backplane with profiles aligned SOSA. It is designed to meet the U.S. Army’s C5ISR Modular Open Suite of Standards (CMOSS), and supports high-speed signals on all data paths and VITA 67.3 and VITA 66.5 connectors.
3U 2-slot OpenVPX Backplane Aligned to SOSA™ - VITA 67.3c Aperture in Slot 2

Designed in alignment with SOSA, this 3U backplane offers 2 Plug-in Card (PIC) slots to support the DoD’s MOSA and CMOSS initiatives. The backplane supports high-speed signals on all data paths and VITA 67.3c aperture in slot 2.
CompactPCI 6U 64 bit ATX 6 slot, P1s no P2-5, RoHS

CompactPCI 6U 6 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
9U CTEL Backplanes with system Slot on left 9U8Slot, 3 x P47
Hall Sensor Board with I2C Interface 046-322

Version: +5V/15A +12V/5A -5V/15A -12V/5A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen.
Hall Sensor Board with I2C Interface 046-323

Version: +5V/60A +3,3V/15A +12V/15A -12V/15A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen.
VME J1J2 Monolithic 9 slot

VME J1J2 Monolithic backplane 9 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
6U 5-Slot OpenVPX Backplane, Profile BKP6-CEN05-11.2.5-1

VPX centralized switch, channel Gbaud rate up to 3.125
7U VPX 4 Slot Power & Ground 10G Pass Through

power for 3.3V, 5V and 12V are included, rear connectors areall fully loaded, use with Elma’s slot to slot or slot to I/O bulkhead cable products during system development.
6U 6-Slot OpenVPX Backplane, Profile BKP6-CEN06-11.2.26x-3

VPX single star backplane with a data plane with 4 fat pipes to each of 5 payload slots, a dual fat pipe expansion plane and an ultra thin pipe control plane
VME J2 7 slot

VME J2 backplane 7 slot, compliant with ANSI/VITA 1-1994. The A+C rows are bussed in all slots. Also, row B has onboard, inboard termination.
VME J1 8 Slot with ADC Connectors

VME J1 backplane 8 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
3U CompactPCI 2-slot SSL 33MHz VIO 3.3V BW 64-Bit

3U CompactPCI Backplane 2-slot, PICMG 2.0 R3.0, system slot left, supports full hot swap function according to PICMG 2.1 R2.0, clock frequency 33MHz, V(I/O) +3.3V, bus width 64-bit, power input connection with Fastons connectors
6U VME Monolithic Classic 5-slot with 70A power bolts

6U VMEbus monolithic backplane 5-slot, VITA, termination passive inboard, daisy chain automatic active, power connection 70A power bolts, I/O pins 13mm gold-plated, shroud (1P1, nJ2) without latches
CompactPCI CTEL 6U 8 slot with H110 bus, P1-2s

CompactPCI CTEL 6U 8 slot with system slot left, H110 bus, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
CTEL 6U 6 slot with ATX, P1P2P4s, P3P5l, RoHS

CompactPCI CTEL 6U 6 slot with system slot left, H110 bus, ATX connector, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
3U CompactPCI Serial 9-slot SSL w/o RTM w/ Ethernet

3U CompactPCI Serial Backplane with 9 CompactPCI S.0 slots, system slot left, without rear IO : 1x CompactPCI S.0 CPU slot, 8x CompactPCI S.0 peripheral slots, without connectors for Rear Transition Modules (RTMs), Ethernet full mesh
VME J1 10 Slot with ADC Connectors

VME J1 backplane 10 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
VPX Extender 3U for VITA 67.1 - Conduction Cooled

3U VPX Extender for conduction cooled boards mounted in conduction cooled chassis VITA 67.1 (VITA 67.1 connectors not included)
3U Hold-Up Board 200W

Hold-Up Board for 28VDC military power supplies which can provide hold up power for up to 200W for 50ms according to MIL-STD 704 / DO160.
3U CompactPCI Serial 9-slot SSL w/ RTM w/ Ethernet

3U CompactPCI Serial Backplane with 9 CompactPCI S.0 slots, system slot left, with rear IO : 1x CompactPCI S.0 CPU slot, 8x CompactPCI S.0 peripheral slots, with connectors for RTMs (RearTransition Modules) in slots 2 to 9, Ethernet full mesh
3U VPX 4 Slot Power & Ground with 3x VITA 67.3C Apertures in P2/J2

The only assigned pins on these backplanes are for 3.3V, 5V and 12V power, and both ground and utility planes are defined. The remaining pins are all user-defined. The rear connectors are all fully populated.
VME J1 17 Slot with ADC Connectors

VME J1 backplane 17 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.