Filter
79 results
30
- 10
- 15
- 20
- 25
- 30
- 50
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
-
System Monitor 3 Gen (SysMon) Fix mounted
The SysMon 3 Gen is a platform-independent system monitoring unit which monitors- and, if necessary, controls - the internal parameters of a System Platform such as voltages, temperatures, digital inputs and fan speeds. -
Hall-Sensor Board with analog output
The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
3U CompactPCI Serial Power Interface Board
Standalone Power-BP 3U 8HP to connect CPCI Serial power supplies to compactPCI Serial-BPs. The connection is made via cables. -
VME Form Factor Extender, 6U, 60mm
The VME form factor extender 6U 60 mm allows to adapt boards for use in the same VMEbus system. It maintain the correct depth dimensions and allow the front panel to be aligned. -
Electronic Load Board 3U CPCI-S (air cooled)
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
Hall Sensor Board with I2C Interface 050-280
Version: +24V/60A -24V/60A -5,2V/90A -2V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
Electronical Load Board 3U CompactPCI (air cooled)
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
Electronical Load Board 6U VME64x (air cooled)
The 6U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
Hall Sensor Board with I2C Interface 050-279
Version: +5V/90A +3,3V/25A +12V/60A +12V/60A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
Hall Sensor Board with I2C Interface 048-368
Version: +5V/60A +5V/60A +3,3V/25A +12V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
VME Test Extender 6U/220mm Universal
The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the... -
6U VPX Load Board
6U VPX Load Board 6U x 160mm, convection-cooled -
Fan Controller (24V / 48V version)
The Fan Controller (FanCon) is a platform independent system monitoring unit which monitors and if applicable controls the parameters, such as temperature and fan rotation speed, of a basic system. -
Fan Controller (12V version)
The Fan Controller (FanCon) is a platform independent system monitoring unit which monitors and if applicable controls the parameters, such as temperature and fan rotation speed, of a basic system. -
Electronical Load Board 3U CompactPCI (conduction cooled)
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. -
3U VPX Conduction Cooled Load Board
3U VPX Load Board, conduction cooled -
SysMon / Shelf Manager Adapter Board
Adapter board for pluggable SysMon and Shelf Manager versions. -
CPCI Load Boards 6Ux160mm
The 6U cPCI Load Board functions to test a system's cooling capabilities by first applying the load to the power supply for verification and finally creating the necessary heat to confirm chassis cooling. -
Hall Sensor Board with I2C Interface 056-742
Version: +5V/60A +3,3V/60A +12V/90A -12V/5A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
Hall Sensor Board with I2C Interface 046-322
Version: +5V/15A +12V/5A -5V/15A -12V/5A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
Hall Sensor Board with I2C Interface 046-323
Version: +5V/60A +3,3V/15A +12V/15A -12V/15A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
VPX Extender 3U for VITA 67.1 - Conduction Cooled
3U VPX Extender for conduction cooled boards mounted in conduction cooled chassis VITA 67.1 (VITA 67.1 connectors not included) -
3U Hold-Up Board 200W
Hold-Up Board for 28VDC military power supplies which can provide hold up power for up to 200W for 50ms according to MIL-STD 704 / DO160. -
VPX Extender 6U - P0 Utility, P1 Differential, P2 Single-Ended Signals, and P3-P6 Differential Pairs
VPX Test Extender 6U 240mm -
VPX Extender 3U All Differential - Conduction / Conduction
VPX Test Extender 3U 240mm for conduction cooled boards in conduction cooled chassis -
Hall Sensor Board with I2C Interface 055-013
Version: +5V/5A +3,3V/5A +12V/5A -12V/5A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
VPX Extender 6U - P0 Utility, P1 To P6 Diff, VIPER
VPX Extender 6U - P0 utility, P1 to P6 differential, with VIPER connectors -
VPX 6U Universal RTM
VPX Rear Transition Module (RTM) 6U x 80 mm -
CPCI Test Extender 6Ux180mm
The cPCI extender boards are designed to bring a circuit card completely out of a card cage or enclosure so that it can be tested or debugged on each 2mm HM connector in P1-P5. Each line in rows A-E can be isolated with the... -
VME / VME64x Load Board 6U
The Elma Electronic VME / VME64x load board provides a means to test the power generated by and cooling capability of VME systems. This makes it easier to locate hot spots in the chassis, so the airflow can be properly directed.