Filter
99 results
30
- 10
- 15
- 20
- 25
- 30
- 50
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
-
CPCI Load Boards 6Ux160mm
The 6U cPCI Load Board functions to test a system's cooling capabilities by first applying the load to the power supply for verification and finally creating the necessary heat to confirm chassis cooling. -
Hall Sensor Board with I2C Interface 056-742
Version: +5V/60A +3,3V/60A +12V/90A -12V/5A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
200 W VITA 62 PSU conduction cooled | 3 U | 5 HP
200 W DC/DC PSU VITA 62 for conduction cooled applications -
Hall Sensor Board with I2C Interface 046-322
Version: +5V/15A +12V/5A -5V/15A -12V/5A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
Hall Sensor Board with I2C Interface 046-323
Version: +5V/60A +3,3V/15A +12V/15A -12V/15A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
350 W VITA 62 PSU | conduction cooled | 3 U | 5 HP | AC (-20C operation)
Designed to meet the requirements of VITA 62 for use in harsh environments. For use in AC systems, they are 3 U high by 5 HP (1-inch) wide modules with guide blocks, for use in conduction cooled VPX systems. -
VPX Extender 3U for VITA 67.1 - Conduction Cooled
3U VPX Extender for conduction cooled boards mounted in conduction cooled chassis VITA 67.1 (VITA 67.1 connectors not included) -
3U Hold-Up Board 200W
Hold-Up Board for 28VDC military power supplies which can provide hold up power for up to 200W for 50ms according to MIL-STD 704 / DO160. -
28 Volt DC Shelf Manager carrier card
The 28VDC carrier card provides all the connectors necessary for the monitoring and control functions of any Elma systems, and also the power supply filtering required by the noise and transients consistent with MIL-STD-704E. -
350 W VITA 62 PSU | conduction cooled | 3 U | 5 HP | AC (-40C operation)
Designed to meet the requirements of VITA 62 for use in harsh environments. For use in AC systems, they are 3 U high by 5 HP (1-inch) wide modules with guide blocks, for use in conduction cooled VPX systems. -
VPX Extender 6U - P0 Utility, P1 Differential, P2 Single-Ended Signals, and P3-P6 Differential Pairs
VPX Test Extender 6U 240mm -
VPX Extender 3U All Differential - Conduction / Conduction
VPX Test Extender 3U 240mm for conduction cooled boards in conduction cooled chassis -
Hall Sensor Board with I2C Interface 055-013
Version: +5V/5A +3,3V/5A +12V/5A -12V/5A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen. -
VPX Extender 6U - P0 Utility, P1 To P6 Diff, VIPER
VPX Extender 6U - P0 utility, P1 to P6 differential, with VIPER connectors -
Chassis Slide Rail Size 3
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments. -
Hold-Up Power Module with optional cover
Hold-Up power module for voltage inputs from 16 to 36VDC provides up to 330W of hold-up power for 50ms. Designed in compliance with MIL-STD-704 / DO160. The board can be ordered as a fixed mount or plug-in version. -
VPX 6U Universal RTM
VPX Rear Transition Module (RTM) 6U x 80 mm -
CPCI Test Extender 6Ux180mm
The cPCI extender boards are designed to bring a circuit card completely out of a card cage or enclosure so that it can be tested or debugged on each 2mm HM connector in P1-P5. Each line in rows A-E can be isolated with the... -
VME / VME64x Load Board 6U
The Elma Electronic VME / VME64x load board provides a means to test the power generated by and cooling capability of VME systems. This makes it easier to locate hot spots in the chassis, so the airflow can be properly directed. -
VPX Extender 3U All Differential - Convection / Convection
VPX Test Extender 3U 240mm for convection cooled boards -
VME Form Factor Extender, 6U, 120mm
The VME form factor extender 6U 120 mm allows to adapt boards for use in the same VMEbus system. It maintain the correct depth dimensions and allow the front panel to be aligned. -
VME Test Extender 6U/220mm 64X with P0
The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the... -
Shelf Manager Carrier and Mezzanine Board pluggable for CompactPCI application
Set of Shelf manager mezzanine board installed on the pluggable carrier board. The pluggable carrier board provides all interfaces on the rear connectors. -
Shelf Manager Mezzanine Module (CompactPCI FW)
The Shelf Manager (ChMC) can be used to monitor the health of a system platform. With the ChMC it's possible to monitor voltages, temperature, fans, to control fans, GPIOs and I2C devices. -
Shelf Manager Carrier and Mezzanine Board fix-mounted for CompactPCI application
Set of Shelf manager mezzanine board installed on the fix mounted carrier board. The fix mounted carrier board provides all interfaces via headers for easy access and can be used directly inside of your system platform. -
VME Test Extender 3U/220mm J1
The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the... -
120 W | 16.5 - 50 VDC | 5 outputs | PSU PCI/104 SFF | conduction-cooled
This rugged isolated power supply is capable of supplying up to 120 watts of power output for a range of sensitive defense applications as well as industrial applications - with conformal coating. -
VME Test Extender 3U/400mm J1
The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the... -
3U VPX Load Board, Air-Cooled
VPX Load Board 3U 160mm -
VME64x Form Factor Extender, 6U x 60mm
the VME64x form factor extender 6U 60 mm allows to adapt boards for use in the same VMEbus system. It maintain the correct depth dimensions and allow the front panel to be aligned.