Backplanes Product Type

Backplanes

Elma Electronic offers a comprehensive range of AdvancedTCA backplanes.

Mesh, Dual Star (5U), and 7U Pluggable Dual Star. Versions for both 19" rackmount and 23" ETSI racks are available. All Elma Electronic AdvancedTCA backplanes are compliant to the PICMG 3.0 Rev. 1.0 specifications.

All Backplanes

Sidebar

6U VME64x 5-slot with P0, with M3/M4 power bolts

6U VME64x Backplane 5-slot, VITA, termination passive inboard, daisy chain automatic active, power connectionM3/M4 power bolts, I/O pins 16mm gold-plated, shroud (1P1/nP2/nP0) optional latches
Electronical Load Board 3U VME64x (air cooled)

The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane.
ATCA 5U 14 Slot Mesh w uTCA connector for SHMM

The 14-slot mesh backplanes have standard 1X full mesh topologies. Elma Electronic’s ATCA backplanes have been simulated and characterized by our signal integrity lab to optimize performance.
VME Test Extender 6U/400mm J1/J2

The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the...
cPSB 2.16 4 slot - 3 w/cPCI, 1 FS

CompactPCI CPSB 2.16 6U 4 slot, 3 w/cPCI, 1 Fabric, fully compliant to the PICMG 2.16 Packet Switching Backplane specification.
CompactPCI 6U 64 bit ATX 8 slot, P1-2s, P3-5l, RoHS

CompactPCI 6U 8 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
ATCA 7U 14 Slot Dual Star 40G - with radial IPMB

The 7U 14 slot ATCA backplane is a dual start with radial IPMI, designed to meet 40Gbps (4 x 10G ports) data rates. Elma's ATCA backplanes have been simulated and characterized by our signal integrity lab to optimize performance.
3U CompactPCI Serial 2-slot SSR w/o RTM w/ Ethernet

3U CompactPCI Serial Backplane with 2 CompactPCI S.0 slots, system slot right, without rear IO : 1x CompactPCI S.0 CPU slot, 1x CompactPCI S.0 peripheral slots, without connectors for RTMs, Ethernet full mesh
3U CompactPCI Serial 6-slot SSL w/o RTM w/ Ethernet

3U CompactPCI Serial Backplane with 6 CompactPCI S.0 slots, system slot left, without rear IO : 1x CompactPCI S.0 CPU slot, 5x CompactPCI S.0 peripheral slots, without connectors for RTMs (RearTransition Modules), Ethernet full mesh
3U 12 Slot OpenVPX Backplane Aligned to SOSA & CMOSS with VITA 66 and 67 optical

This 14 slot 3U OpenVPX backplane (12 payload +2 power supply slots) supports high speed signals on all data paths plus has VITA67.3 modular connectors compatible with legacy VITA 67.1 and VITA 66.4 RF and optical I/O connectors.
6U and 7U VPX 1 to 15 Slot Power & Ground Only Backplanes

Elma’s 6U / 7U VPX power and ground only backplanes provide a cost-effective way to design and test cards using the VPX architecture. The only assigned pins are for 3.3V, 5V and 12V power, and both ground and utility planes are defined.
CompactPCI 6U 16 slot left justified P1-2s, P3-5l, 2 x P47

CompactPCI 6U 16 slot 64 bit Easyplug with 2 x P47 power connector, system slot left, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
VME Test Extender 3U/400mm J2

The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the...
VME J1J2 Monolithic 20 slot

VME J1J2 Monolithic backplane 20 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
3U OpenVPX 6 Slot variant Profile BKP3-CEN06-15.2.2X-3

Single star, no expansion plane| control plane 3U, 6 Slots
VME J1J2 Monolithic 8 slot

VME J1J2 Monolithic backplane 8 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
3U 1-Slot OpenVPX P&G, Aperture K, VITA 67.3E, w/ROHS, 10G

3U 1-Slot OpenVPX Power & Ground, Aperture K, Supports VITA 67.3E, Pass through, w/ROHS, Max data rate (Gbps) 10
Power Interface Board 3 HE, 2PSU-Steckverbinder

the PIB 3U 2 slot has two power connector P47 and connects to the backplane via power bugs with 6/32 screws. It is used to facilitate pluggable power supplies, headers, and utility connectors.
VME J1 4 Slot with ADC Connectors

VME J1 backplane 4 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
3U CompactPCI Serial 6-slot SSL w/ RTM w/ Ethernet

3U CompactPCI Serial Backplane with 6 CompactPCI S.0 slots, system slot left, with rear IO : 1x CompactPCI S.0 CPU slot, 5x CompactPCI S.0 peripheral slots, with connectors for Rear Transition Modules (RTMs) in slots 2 to 6, Ethernet full mesh
3U VPX 1 Slot Power & Ground with VITA 67.3E Aperture, 25G

Power for 3.3V, 5V and 12V per VITA 46, with all rear connectors fully loaded. Use with Elma’s slot-to-slot or slot-to-I/O bulkhead cable products for system development.
VME J1 18 Slot with ADC Connectors

VME J1 backplane 18 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
3U OpenVPX 9 Slot Variant to Profile BKP3-CEN09-15.2.17X-3

Hierarchical star, no expansion plane| control plane, 3U, 9 Slots
VME64X 7U 12 slot no P0

7U VME64x Backplane 12-slot w/o P0, compliant with ANSI/VITA 1.1-1997, VME extension, and VITA 1.7 Increased Current. The extra 1U provides room for extra power bugs or busbars. Includes termination passive inboard and daisy chain automatic active.
CompactPCI 6U 64 bit ATX 5 slot, P1s no P2-5, RoHS

CompactPCI 6U 5 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
ATCA 5U 6 Slot Mesh

The 5U 6-slot ATCA backplane is a 3X Replicated Mesh, compliant to the PICMG 3.0 Rev 3.0 specification. Elma Bustronic’s ATCA backplanes have been simulated and characterized by our signal integrity lab to optimize performance.
CompactPCI 6U 64 bit ATX 3 slot, P1-2s, P3-5l, RoHS

CompactPCI 6U 3 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
CTEL 6U 16 slot left justfied, P1-2s, P3-5l

CompactPCI CTEL 6U 16 slot with system slot left, H110 bus, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
CompactPCI 3U 6 slot 64 bit right justified, P1s P2s

CompactPCI 3U 6 slot 64 bit low profile with system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
VME64X 7U 12 slot with P0

7U VME64x Backplane 12-slot with P0, compliant with ANSI/VITA 1.1-1997, VME extension, and VITA 1.7 Increased Current. The extra 1U provides room for extra power bugs or busbars. Includes termination passive inboard and daisy chain automatic active.