Backplanes Product Type

Backplanes

Elma Electronic offers a comprehensive range of AdvancedTCA backplanes.

Mesh, Dual Star (5U), and 7U Pluggable Dual Star. Versions for both 19" rackmount and 23" ETSI racks are available. All Elma Electronic AdvancedTCA backplanes are compliant to the PICMG 3.0 Rev. 1.0 specifications.

All Backplanes

Sidebar

3U OpenVPX 7 Slot Profile BKP3-CEN07-15.2.3-4

Single star, no expansion plane| control plane. Supports PCIe Gen 3.
Power Interface Board 6 HE, 2 PSU-Steckverbinder mit AC pins

the PIB 6U 2 slot has one power connector P47 with AC pins and connects to the backplane via power bugs with 6/32 screws. It is used to facilitate pluggable power supplies, headers, and utility connectors.
6U 5-Slot OpenVPX Backplane, Profile BKP6-CEN05-11.2.5-3

VPX centralized switch, channel Gbaud rate up to 6.25Gbps
Test Product Entry for Shopify Testing

Shopify Product Test Extended Description - blah blah blah
VME J1J2 Monolithic 6 slot

VME J1J2 Monolithic backplane 6 slot, compliant with ANSI/VITA 1-1994. 8-layer stripline design Includes passive termination inboard and automatic daisy chain connectors.
3U VPX Extender, All Differential - Conduction / Convection

VPX Test Extender 3U x 240mm for conduction cooled boards in convection chassis
3U CompactPCI Serial 7-slot SSR w/ RTM w/ Ethernet

3U CompactPCI Serial Backplane with 7 CompactPCI S.0 slots, system slot right, with rear IO: 1x CompactPCI S.0 CPU slot, 6x CompactPCI S.0 peripheral slots, with connectors for RTMs, Ethernet single star from system slot to all peripheral slots
3U OpenVPX 8 slot Profile BKP3-CEN08-15.2.16-4

VPX Single star with data plane switch and control plane switch, channel Gbaud rate up to 8 on data plane and 10.3125 on control plane, 3U, 8 Slots
3U CompactPCI Serial 7-slot SSR w/o RTM w/ Ethernet

3U CompactPCI Serial Backplane with 7 CompactPCI S.0 slots, system slot right, without rear IO: 1x CompactPCI S.0 CPU, 6x CompactPCI S.0 peripheral slots, without connectors for RTMs, Ethernet single star from system slot to all peripheral slots
3U VPX 1 Slot Power & Ground 25G Pass Through

power for 3.3V, 5V and 12V are included, rear connectors are all fully loaded, use with Elma’s slot to slot or slot to I/O bulkhead cable products during system development.
CompactPCI 6U 64 bit ATX 6 slot, P1-2s, P3-5l, RoHS

CompactPCI 6U 6 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
7U VPX 6-Slot Power & Ground with VITA 67 Aperture with 1 RF 8 position in J3

Power for 3.3V, 5V and 12V, rear connectors fully loaded. Use with Elma’s slot-to-slot or slot-to-I/O bulkhead cable products for system development.
CompactPCI 6U 4 Slot right justified, 64 bit, P1-2s, P3-5l

CompactPCI 6U 4 slot 64 bit with system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1. User defined VI/O is standard.
ATCA 5U 6 Slot replicated Mesh 40G - with radial IPMB

The 5U 6 slot ATCA backplane is a 6 slot replicated Mesh with radial IPMB, designed to meet 40Gbps (4 x 10G ports) data rates. Elma Bustronic’s ATCA backplanes have been simulated and characterized by our signal integrity lab to optimize performance.
3U 1-Slot OpenVPX P&G, Aperture H, VITA 67.3C , Module TE 2828775-1, w/ROHS, 3.125G

3U 1-Slot OpenVPX Power & Ground, Aperture H, Supports VITA 67.3C , Module TE 2828775-1, Pass through with VITA 67.3C ctr in J2, w/ROHS, Max data rate (Gbps) 3.125
CompactPCI CTEL 7U 2 Slot with H.110 bus, P1-2s

CompactPCI CTEL 7U 2 slot with system slot left, H110 bus, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
ATCA Test Extender with Zone 3

The ATCA extender board extends both the power and IPMB signals. It is designed for the full populated fabric slot (5 ZD connectors, P20 thru P24) and the power connector J10.
VME Form Factor Extender, 3U, 60mm

The VME form factor extender 3U 60 mm allows to adapt boards for use in the same VMEbus system. It maintain the correct depth dimensions and allow the front panel to be aligned.
VME Test Extender 9U/400mm J1/J2/J0

The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the...
3U VPX 1 Slot Power & Ground

Power for 3.3V, 5V and 12V are included, rear connectors are all fully loaded, use with Elma’s slot to slot or slot to I/O bulkhead cable products during system development.
VME64X 6U 14 Slot no P0

6U VME64x Backplane 14-slot without P0, compliant with ANSI/VITA 1.1-1997, VME extension standard. Includes termination passive inboard, daisy chain automatic active, and power bugs on top and bottom of slots.
VME64X 6U 14 Slot with P0

6U VME64x Backplane 14-slot with P0, compliant with ANSI/VITA 1.1-1997, VME extension standard. Includes termination passive inboard, daisy chain automatic active, and power bugs on top and bottom of slots.
3U OpenVPX 8-slot Profile BKP3-CEN08-15.2.15-n

3U OpenVPX Backplane 8-slot, VITA 65, Backplane profile BKP3-CEN08-15.2.15-n, payload slot profile SLT3-PAY-2F2U-14.2.3, switch slot profile SLT3-SWH-6F6U-14.4.1, power connections with M3/M4 power bolts
VME64X 7U 15 slot with P0

7U VME64x Backplane 15-slot with P0, compliant with ANSI/VITA 1.1-1997, VME extension, and VITA 1.7 Increased Current. The extra 1U provides room for extra power bugs or busbars. Includes termination passive inboard and daisy chain automatic active.
CTEL 6U 8 slot with ATX, P1P4s, P2P3P5l, RoHS

CompactPCI CTEL 6U 8 slot with system slot left, H110 bus, ATX connector, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
ATCA 5U 6 Slot Dual Dual Star 40G - with bused IPMB

The 5U 6 slot ATCA backplane is a dual dual start with bused IPMB, designed to meet 40Gbps (4 x 10G ports) data rates. Elma Bustronic’s ATCA backplanes have been simulated and characterized by our signal integrity lab to optimize performance.
6U 5-Slot OpenVPX Backplane; Profile BKP6-DIS05-11.2.16-3

VPX mesh, 4 lane Fat Pipe, up to 6.25 Gbps per channel
CompactPCI 3U 6 slot right justified, 32 bit, P1s, P2l

CompactPCI 3U 6 slot 32 bit with system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1. User defined VI/O is standard.
SOSA Aligned Family of Chassis Managers, VITA 46.11

Designed to align with SOSA® and OpenVPX based systems, Elma’s VPX Chassis Manager assures the proper operation of chassis components (power supply, fans, backplane) and plug-in cards in defense embedded computing platforms. It monitors the health of the chassis, reports anomalies and takes actions...
3U VPX 1 Slot Power & Ground with VITA 67.3C Aperture, 25G

power for 3.3V, 5V and 12V are included, rear connectors are all fully loaded, use with Elma’s slot to slot or slot to I/O bulkhead cable products during system development.