Backplanes Product Type

Backplanes

Elma Electronic offers a comprehensive range of AdvancedTCA backplanes.

Mesh, Dual Star (5U), and 7U Pluggable Dual Star. Versions for both 19" rackmount and 23" ETSI racks are available. All Elma Electronic AdvancedTCA backplanes are compliant to the PICMG 3.0 Rev. 1.0 specifications.

All Backplanes

Sidebar

3U CompactPCI Serial 9-slot SSL w/o RTM w/ Ethernet.

3U CompactPCI Serial Backplane with 9 CompactPCI S.0 slots, system slot left, without rear IO: 1x CompactPCI S.0 CPU, 8x CompactPCI S.0 peripheral slots, without connectors for RTMs, Ethernet single star from system slot to all peripheral slots
3U OpenVPX 6 Slot Profile BKP3-CEN06-15.2.2-3

Single Star, expansion and control planes, 6.25 Gb/s
CompactPCI 9U 8 Slot, P1-2s, P3-5l, 3 x P47

CompactPCI 9U 8 slot 32 bit Easyplug with 3 x P47 power connector, system slot left, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
3U VPX 1 Slot P&G w VITA 66.4 connector J2. 10G

power for 3.3V, 5V and 12V are included, rear connectors are all fully loaded, use with Elma’s slot to slot or slot to I/O bulkhead cable products during system development.
3U CompactPCI Serial 9-slot SSL w/ RTM w/ Ethernet.

3U CompactPCI Serial Backplane with 9 CompactPCI S.0 slots, system slot left, with rear IO: 1x CompactPCI S.0 CPU slot, 8x CompactPCI S.0 peripheral slots, with connectors for RTMs, Ethernet single star from system slot to all peripheral slots
Electronic Load Board 3U CPCI-S (air cooled)

The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane.
VME64X 7U 18 slot no P0

7U VME64x Backplane 18-slot w/o P0, compliant with ANSI/VITA 1.1-1997, VME extension, and VITA 1.7 Increased Current. The extra 1U provides room for extra power bugs or busbars. Includes termination passive inboard and daisy chain automatic active.
3U OpenVPX 8-slot Profile BKP3-CEN08-15.2.16-n

3U OpenVPX Backplane 8-slot, VITA 65, Backplane profile BKP3-CEN08-15.2.16-n, payload slot profile SLT3-PAY-2F2U-14.2.3, switch slot profile SLT3-SWH-6F6U-14.4.1 and SLT3-SWH-2F24U-14.4.3, power connections with M3/M4 power bolts
3U 1-Slot OpenVPX Power and Ground w/o ROHS, 3.125G

3U 1-Slot OpenVPX Power & Ground, Pass through, conformal coating, w/o ROHS, Max data rate (Gbps) 3.125
6-slot 3U OpenVPX backplane aligned to SOSA, 25Gbps, apertures for VITA 66/67 modules

Designed in alignment SOSA, this 3U backplane offers 6 PIC (Plug in Card) slots supporting high-speed signals on all data paths and VITA 67.3 connectors and VITA 66.5 optical connectors.
7U VPX 1-Slot Power & Ground with VITA 3 x 67.3C Aperture and Connectors installed in J3, J5 and J6, w/o ROHS, 25G

7U 1-Slot OpenVPX Power & Ground, Aperture H, Supports VITA 3 x 67.3C , Pass through with apertures in J3, J5, and J6, w/o ROHS, Max data rate (Gbps) 25
CompactPCI 6U 64 bit ATX 8 slot, P1s P2l, RoHS

CompactPCI 6U 8 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
CompactPCI 3U 4 slot 64 bit right justified RoHS, P1s P2s

CompactPCI 3U 4 slot 64 bit low profile with system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
CompactPCI 6U 16 slot P1-2s, P3-5l, 2 x P47

CompactPCI 6U 16 slot 64 bit Easyplug with 2 x P47 power connector, system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
CompactPCI 3U 8 slot 64 bit right justified, P1s P2s

CompactPCI 3U 8 slot 64 bit low profile with system slot right, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
VME J2 9 slot

VME J2 backplane 9 slot, compliant with ANSI/VITA 1-1994. The A+C rows are bussed in all slots. Also, row B has onboard, inboard termination.
7U VPX 1 Slot Power & Ground 25G Pass Through

power for 3.3V, 5V and 12V are included, rear connectors areall fully loaded, use with Elma’s slot to slot or slot to I/O bulkhead cable products during system development.
Hold-Up Power Module - PCB only without cover

Hold-Up Power Module for voltage input of 16 to 36VDC provides maximum power output of 330W for 50ms per MIL-STD 704 / DO160. Board can be ordered as fixed-mount or plug-in version.
7U 1-Slot OpenVPX P&G, Aperture H, VITA 2 X 67.3C , w/o ROHS, 10G

7U 1-Slot OpenVPX Power & Ground, Aperture H, Supports VITA 2 X 67.3C , Pass through with apertures in J3 and J6, w/o ROHS, Max data rate (Gbps) 10
CompactPCI 6U 64 bit ATX 4 slot, P1s P2l, RoHS

CompactPCI 6U 4 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
CompactPCI 3U 4 slot 64 bit left justified RoHS, P1s P2s

CompactPCI 3U 4 slot 64 bit low profile with system slot left, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
CompactPCI 6U 14 Slot, P1-2s, P3-5l, 3 x P47 + bridge

CompactPCI 6U 14 slot with bridge 64 bit Easyplug with 3 x P47 power connector, system slot left, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
3U CompactPCI Serial 4-slot SSL w/o RTM w/ Ethernet

3U CompactPCI Serial Backplane with 4 CompactPCI S.0 slots, system slot left, without rear IO : 1x CompactPCI S.0 CPU slot, 3x CompactPCI S.0 peripheral slots, without connectors for Rear Transition Modules (RTMs), Ethernet full mesh
VME64X 7U 18 slot with P0

7U VME64x Backplane 18-slot with P0, compliant with ANSI/VITA 1.1-1997, VME extension, and VITA 1.7 Increased Current. The extra 1U provides room for extra power bugs or busbars. Includes termination passive inboard and daisy chain automatic active.
Hall Sensor Board with I2C Interface 050-280

Version: +24V/60A -24V/60A -5,2V/90A -2V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen.
3U VPX 1 Slot Power & Ground with VITA 67.3C Aperture, 10G

Power for 3.3V, 5V and 12V are included, rear connectors are all fully loaded, use with Elma’s slot to slot or slot to I/O bulkhead cable products during system development.
3U CompactPCI Serial 4-slot SSL w/ RTM w/ Ethernet

3U CompactPCI Serial Backplane with 4 CompactPCI S.0 slots, system slot left, with rear IO : 1x CompactPCI S.0 CPU slot, 3x CompactPCI S.0 peripheral slots, with connectors for Rear Transition Modules (RTMs) in slots 2 to 4, Ethernet full mesh
CompactPCI 6U 6 Slot left justified, 32 bit, P1s, P2-5l

CompactPCI 6U 6 slot 32 bit with system slot left, fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1. User defined VI/O is standard.
6U 6-Slot OpenVPX Backplane Profile BKP6-DIS06-11.2.18-3

VPX mesh, 4 lane Fat Pipe, QFP expansion plane, up to 6.25 Gbps per channel
3U 6-Slots OpenVPX P&G, w/o ROHS, 3.125G

3U 6-Slots OpenVPX Power & Ground, Pass through, no RTM, GA changed to 7-12, w/o ROHS, Max data rate (Gbps) 3.125