Chassis Platforms

Type 11C, CPCI, Rackmount/Wallmount

Elma Type 11C family of enclosures provides a high quality, cost effective pre-plated steel platform. Designed to IEEE 1101.10/.11 standards, Type 11C enclosures give advanced EMC shielding protection. Configure Your Solution
Type 39 CompacFrame Development Platform, 6 and 8 Slot 3U OpenVPX Aligned to SOSA

Elma’s SOSA aligned CompacFrame is the next generation portable test platform designed to accelerate development and test of plug-in cards (PICs) aligned to the Open Group® SOSA™ Technical Standard. Accommodates up to 8-slot OpenVPX backplane.
CompactPCI Serial, 5 Slots, SSR, 4 U, 42 HP, 294 mm

CompactPCI Serial System Platform with 5 Slots: 4x CompactPCI-S.0 Peripheral Slots and 1x CompactPCI-S.0, System Slot on the right side of the system platform. High-speed connectors support data transfer rates of up to 12 Gbps for all slots.
Mini ATR – 3U, VPX, Rugged, Small Form Factor 3-Slot

The modular design of this Mini ATR platform allows for various configurations. The chassis can easily be scaled up or down while using the same side walls. DC and AC power variations as well as custom front I/O configurations are available. Configure Your Solution
Hold-Up Power Module - PCB only without cover

Hold-Up Power Module for voltage input of 16 to 36VDC provides maximum power output of 330W for 50ms per MIL-STD 704 / DO160. Board can be ordered as fixed-mount or plug-in version.
VME Type 32 with 6U, 5 slot Backplane

VME Type 32 with 6U, 5 slot Backplane J1, J2.
VITA, Type 14V, 19" Rackmount Family

Elma's Type 14V family of enclosures provides a high quality, modular platform for Desktop or Rackmount VITA System applications. 3U, 6U or 9U cards mounted vertically or horizontally. Systems can be configured with or without rear I/O card cage. Configure Your Solution
Hall Sensor Board with I2C Interface 050-280

Version: +24V/60A -24V/60A -5,2V/90A -2V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen.
3U VITA 62 Power Supply Module, 300W with hold up power, conduction cooled

Designed to VITA 62, this 3U x 9HP DC power supply module is conduction-cooled and provides up to 50ms hold-up time and a BIT controller
VXS Type 32V, w/plug in PSU

VXS Type 32V family of enclosures provide a lightweight, tower platform for packaging portable VITA System applications. Designed to VITA & IEEE. Systems can be configured with or without rear I/O card cage. Configure Your Solution
AdvancedTCA, Type 11A, 4U 19" Horizontal, DC

Elma's ATCA, DC, 4U horizontal enclosure with backplane, and shelf mgmt. options. Pluggable and redundant fans, PEMs and shelf managers for availability (99.999%). Optimized via backplane signal integrity studies and chassis thermal simulation.
Electronical Load Board 3U CompactPCI (air cooled)

The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane.
Electronical Load Board 6U VME64x (air cooled)

The 6U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane.
28 Volt DC Shelf Manager carrier card with conformal coating

The 28VDC carrier card with confirmal coating provides all the connectors necessary for the monitoring and control functions of any Elma systems, and also the power supply filtering required by the noise and transients consistent with MIL-STD-704E.
Hall Sensor Board with I2C Interface 050-279

Version: +5V/90A +3,3V/25A +12V/60A +12V/60A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen.
Hall Sensor Board with I2C Interface 048-368

Version: +5V/60A +5V/60A +3,3V/25A +12V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen.
Type 39 CompacFrame Development Platform, 1 - 4 Slot 3U VPX Power and Ground Backplane

Elma’s slimline CompacFrame is the next-generation platform designed to accelerate development and test of Plug-In Cards (PICs). The 3U card cage in the platform is tilted upward by 5º for easier card access and accommodates backplanes up to 4 slots.
OpenVPX Cable solutions

Compliant to VITA 46 and 65, the cabling assemblies are ideal for development. They can be used for I/O to bulkhead connectors and slot-to-slot connections. Front-plug versions allow testing across the backplane or full interconnect path.
VME Test Extender 6U/220mm Universal

The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the...
6U VPX Load Board

6U VPX Load Board 6U x 160mm, convection-cooled
ELOS CompactPCI Serial

ELOS is an embedded rugged CompactPCI Serial system platform for a wide range of applications. The cost-efficient concept is based on modular building blocks that make this product extremely flexible.
Fan Controller (24V / 48V version)

The Fan Controller (FanCon) is a platform independent system monitoring unit which monitors and if applicable controls the parameters, such as temperature and fan rotation speed, of a basic system.
Fan Controller (12V version)

The Fan Controller (FanCon) is a platform independent system monitoring unit which monitors and if applicable controls the parameters, such as temperature and fan rotation speed, of a basic system.
AdvancedTCA, Type 11A, 5U 19" Horizontal, AC

Elma's ATCA, AC, 5U horizontal enclosure with backplane, and shelf mgmt. options. Pluggable and redundant fan trays, PEMs and shelf managers for availability (99.999%). Optimized via backplane signal integrity studies and chassis thermal simulation.
Type 12R1 Family of 19" Rackmount Chassis Platforms, Reduced Weight, Rugged

The Type 12R1 family is a 19" rackmount chassis platform that is rugged yet lighter weight than the sturdier Type 12R2 platform. The chemical conversion coating provides corrosion protection and electrical conductivity. The rear evacuation cooling system uses high CFM blowers to remove the...
Type 12R2, 19" Rackmount, MIL-Rugged, Family

The 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock inputs to the chassis to less than 10Gs at the card cage. Configure Your Solution
Type 39 E-Frame Development Platform, 6 Slot 3U OpenVPX

The Type 39 E-Frame (Short), test platform supports 3U, VPX development. With a rugged aluminum construction, the versatile Type 39 E-frame is 9U to hold 3U cards. Available in compact (49HP) and full (84HP) for mounting 3-15 slots at 1" pitch. Configure Your Solution
Electronical Load Board 3U CompactPCI (conduction cooled)

The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane.
3U VPX Conduction Cooled Load Board

3U VPX Load Board, conduction cooled
120 W | 15 - 36 VDC | 5 outputs | PSU PCI/104 SFF | conduction-cooled

This rugged isolated power supply is capable of supplying up to 120 watts of power output for a range of sensitive defense applications as well as industrial applications - with conformal coating.